Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Cooling
Model Year: 2008 Model: Sequoia Doc ID: RM000002BGI00SX
Title: 3UR-FE COOLING: RADIATOR: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER 3UR-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 Sequoia)+

2. DRAIN ENGINE COOLANT 3UR-FE COOLING: COOLANT: REPLACEMENT (2008 Sequoia)+

3. REMOVE FRONT BUMPER COVER ASSEMBLY

(a) Remove the front bumper cover assembly EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 Sequoia) .

4. REMOVE NO. 1 FRONT BUMPER SIDE RETAINER SUB-ASSEMBLY RH (w/ Trailer Towing System)

5. REMOVE OIL COOLER ASSEMBLY (w/ Trailer Towing System) 3UR-FE LUBRICATION: ENGINE OIL COOLER: REMOVAL (2008 Sequoia)+

6. REMOVE V-BANK COVER SUB-ASSEMBLY 3UR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL (2008 Sequoia)+

7. REMOVE INLET RADIATOR HOSE

(a) Remove the inlet radiator hose.

8. DISCONNECT OUTLET RADIATOR HOSE

(a) Disconnect the outlet radiator hose from the water inlet housing.

9. REMOVE FAN SHROUD (w/ Trailer Towing System)

(a) Loosen the 4 nuts holding the fluid coupling and fan.

(b) Remove the fan and generator V belt 3UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL (2008 Sequoia)+ .

(c) Detach the claw to open the No. 1 flexible hose clamp.

(d) Disconnect the reservoir hose from the upper radiator tank .

(e) Remove the 2 bolts holding the fan shroud.

(f) Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

NOTICE:

Be careful not to damage the radiator core.

(g) Remove the fan pulley from the fan bracket.

10. REMOVE FAN SHROUD (w/o Trailer Towing System)

(a) Loosen the 4 nuts holding the fluid coupling fan.

(b) Remove the fan and generator V belt 3UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL (2008 Sequoia)+ .

(c) Disconnect the reservoir hose from the upper radiator tank .

(d) Remove the 2 bolts holding the fan shroud.

(e) Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

NOTICE:

Be careful not to damage the radiator core.

(f) Remove the fan pulley from the fan bracket.

11. REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Trailer Towing System)

(a) Remove the 6 clips and side deflector.

12. REMOVE RADIATOR SIDE DEFLECTOR LH

(a) Remove the 6 clips and side deflector.

(b) Disconnect the wire harness clamp.

13. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL (for LH Side)

(a) Remove the 3 clips and remove the No. 1 radiator to support seal.

14. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL (for RH Side)

(a) Remove the 3 clips and remove the No. 1 radiator to support seal.

15. REMOVE RADIATOR ASSEMBLY

(a) Remove the 4 bolts and radiator.

16. REMOVE OUTLET RADIATOR HOSE

(a) Remove the outlet radiator hose from the radiator.